Putting up a bathroom cabinet on tiles can be a bit tricky, but with the right tools and techniques, it can be done easily. In this article, we will discuss how to put up a bathroom cabinet on tiles in detail, step by step.
Step 1: Choose the location Determine where you want the cabinet to be placed. Make sure that it is not too high or too low, and it should be easily accessible. Once you have chosen the location, mark it with a pencil.
Step 2: Measure the cabinet and the space Measure the width and height of the cabinet and the space where you want to install it. This will help you determine if the cabinet will fit in the space or if you need to adjust the location.
Step 3: Gather the tools and materials You will need a few tools and materials to put up the cabinet on tiles. These include a drill, drill bits, screws, wall anchors, a screwdriver, a level, a pencil, and the cabinet itself.
Step 4: Prepare the wall Before you start drilling, it is essential to clean the area where you want to install the cabinet. Remove any dirt, dust, or grime from the tiles, and make sure that the surface is dry. You can use a clean cloth or a mild cleaning solution to clean the tiles.
Step 5: Mark the drilling points Using a level and a pencil, mark the drilling points on the tiles. Make sure that the marks are level and evenly spaced.
Step 6: Drill holes in the tiles Using a masonry drill bit, drill holes on the marked points on the tiles. Make sure that the holes are deep enough to accommodate the wall anchors. You can also use a tile drill bit to prevent the tiles from cracking.
Step 7: Insert wall anchors Insert the wall anchors into the drilled holes on the tiles. Tap them gently with a hammer to ensure that they are securely in place.
Step 8: Attach the mounting brackets Attach the mounting brackets to the cabinet using the screws provided. Make sure that the brackets are level and evenly spaced.
Step 9: Hang the cabinet Lift the cabinet and hang it on the mounting brackets. Make sure that it is level and securely in place.
Step 10: Screw the cabinet to the wall Using a screwdriver, screw the cabinet to the wall anchors. Make sure that the screws are tight and secure.
Step 11: Clean up Clean up the area and remove any debris or dust from the installation process.
Congratulations, you have successfully put up a bathroom cabinet on tiles!
Tips:
- Use a spirit level to ensure that the cabinet is level.
- Always use the correct drill bit for the tiles.
- Be careful not to over-tighten the screws as this can damage the tiles.
- If you are unsure about any part of the installation process, seek advice from a professional.
In conclusion, putting up a bathroom cabinet on tiles can be a DIY project if you have the right tools and follow the steps above. It is important to take your time, measure carefully, and make sure that the cabinet is level and securely in place. With a little patience and effort, you can have a beautiful and functional bathroom cabinet that enhances the look of your bathroom.